Search

800G Modules New Arrival!

Generic Compatible SFP28 32G Fibre Channel 850nm 100m DOM Duplex LC/UPC MMF Optical Transceiver Module

FEATURES

  • 32GFC(05Gb/s) serial optical interface
  • 850nm VCSEL transmitter and GaAs PIN PD receiver
  • Wide operating temperature(0°C~70°C)
  • Low power consumption <1W
  • Maximum link length of 70m via OM3 multimode Fiber (MMF)
  • Maximum link length of 100m via OM4 multimode Fiber (MMF)
  • Fibre Channel FC-PI-6 compliant high speed interface

–3200-M5-SN-S, 3200-M5E-SN-I, 3200-M5F-SN-I

Generic Compatible SFP28 32G Fibre Channel 850nm 100m DOM Duplex LC/UPC MMF Optical Transceiver Module Description

Generic Compatible SFP28 32G Fibre Channel 850nm 100m DOM Duplex LC/UPC MMF Optical Transceiver Module

The OFSF32GD1C-F85 Transceiver is intended for 100m reach service 28.05Gb/s 850nm Multi-mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It consumes low power, operates base on 3.3V DC power supply and is offered in the commercial temperature range. They are compliant with SFP+ MSA, SFF-8431 and SFF-8432.  High speed electrical and optical specifications are compliant with ANSI Fibre Channel FC-PI-6.

Model Name:OFSF32GD1C-F85Vendor Name:Mvslink
Form Factor:SFP28Data Rate:32Gbps
Wavelength:850nmDistance:100m
Connector:LC duplexCable Type:MMF
Transmitter Type:DFBReceiver Type:PIN
TX Power:-6.7~2dBmReceiver Sensitivity:<-10.2dBm
Power Consumption:<1WCommercial Temperature Range:0°C to +70°C
DDM:SupportBit Error Ratio (BER):1*10-6
Protocols:MSA CompliantWarranty:5 Years

Applications

  • Fibre Channel switches (director, stand alone, blade)
  • Fibre Channel Host Bus Adapters
  • Fibre Channel RAID controllers
  • Fibre Channel tape drive
  • Port side connections
  • Inter-switch or inter-chassis aggregated links

Digital Diagnostics Functions

As defined by the SFF-8472, Our SFP+ transceivers provide digital diagnostic functions via a 2-wire serial interface, which allows real-time access to the following operating parameters:

  • Transceiver temperature
  • Laser bias current
  • Transmitted optical power
  • Received optical power
  • Transceiver supply voltage

It also provides a sophisticated system of alarm and warning flags, which may be used to alert end-users when particular operating parameters are outside of a factory-set normal range. The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through the 2-wire serial interface. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially. The 2-wire serial interface provides sequential or random access to the 8 bit parameters, addressed from 0x00h to the maximum address of the memory. For more detailed information, including memory map definitions, please refer the SFF-8472 documentation. 

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, which guarantees flawless operations.

Generic Compatible SFP28 32G Fibre Channel 850nm 100m DOM Duplex LC/UPC MMF Optical Transceiver Module插图

Questions & Answers

Q: May I know if your 32gb transceivers will work with 16g and 8g transceivers?
A: Yes, this transceiver can work at the rate of 16G and 8G, but it may need your device support 8G/16G/32G.
Q: Hello, I would like to know whether your company’s 32G module can be used at 16G and 8G rates, and if the 32G module can be used on a device with 8G rate without SFP28 interface, please confirm it, thank you
A: Hi, the 32G FC module can be used at 16G and 8G, but first, the device needs to support the rate of 8/16/32G; if the device slot only supports 8G, it is not recommended to use the 32G FC module.